Gas Genset - TCG 2020 Series

The MWM gas engines of the TCG 2020 series are perfectly geared to the challenges of a dynamic market environment. Our models in the output range of 1,000 – 2,000 kWel meet the high requirements of a broad range of applications and guarantee efficiency, reliability, flexibility and environmental sustainability, together with low lifecycle costs and high profitability.

Gas Engine TCG 2020 – High Profitability Thanks to High Efficiency

  • Improvements of the intake duct and spark plug provide higher efficiency compared to predecessor model
  • Miller valve control times increase genset efficiency

TCG 2020 V12 – Increased Efficiency and Extended Useful Life in the 1 MWel Capacity Range

  • For all natural gas and biogas applications in countries with 50 Hz networks
  • Longer maintenance intervals for all natural gas applications extend useful life by two years
  • Optimized electrical efficiency of 43 percent (under ISO conditions) for natural gas applications
  • Optimized lubricant management
  • Lower internal consumption through higher mixture cooler temperatures for natural gas applications
  • Special 1,000 kWel variant available for high altitude setup

TCG 2020K – Optimized for Isolated Operation and Non-ISO Conditions

  • Load response in only seven steps
  • Fast and reliable supply in the event of grid failures or in isolated operation

Higher Efficiency and Lower Pollutant Emissions

  • Smaller dead spaces in combustion chamber ensure more complete combustion
  • Reduced fuel consumption and CO and HC emissions
  • This enables gas savings of up to 15 percent a year and increases the profitability of the plant

Higher Efficiency and Long Maintenance Intervals

  • Effective crankcase ventilation increases efficiency by utilizing the returned combustible blow-by gas
  • Optimized blow-by return and improved separation of the gas phase and liquid phase enable longer maintenance intervals for the turbocharger thanks to the clean intake air

K Editions: Maximum Output at Low Costs

  • Improved output capacity of TCG 2020K under non-ISO conditions and excellent load response through optimum turbocharger design with broad performance map
  • TCG 2020 K1 is a for 1000 kWel optimized version of the TCG 2020 K gas engine with a focus on high efficiency at low cost of investment

Performance Data

Natural gas applications, NOx ≤ 500 mg/Nm3 *

Engine Type   TCG 2020 V12 (1.0) TCG 2020 V12 K1 TCG 2020 V12 K TCG 2020 V12 TCG 2020 V16 K TCG 2020 V16 TCG 2020 V20 TCG 2020 V20 (HE)
Electrical Output kW 1000 1000 1125 1200 1500 1560 2000 2000
Medium Effective Pressure bar 15.5 15.5 17.4 18.6 17.5 18.1 18.6 18.6
Thermal Output ± 8% kW 1057 1177 1253 1190 1675 1580 1977 1912
Electrical efficiency % 43.0 40.0 40.9 43.6 40.9 43.2 43.7 44.4
Thermal efficiency % 45.4 47.0 45.6 43.3 45.7 43.8 43.2 42.5
Total efficiency % 88.4 87.0 86.5 86.9 86.6 87.0 86.9 86.9

Bio gas applications, NOx ≤ 500 mg/Nm3 *

Engine Type   TCG 2020 V12 (1.0) TCG 2020 V12 TCG 2020 V16 TCG 2020 V20
Electrical output kW 1000 1200 1560 2000
Medium Effective Pressure bar 15.5 18.6 18.1 18.6
Thermal output± 8% kW 1037 1194 1577 2012
Electrical efficiency % 42.6 43.0 42.6 43.0
Thermal efficiency % 44.2 42.8 43.1 43.3
Total efficiency % 86.8 85.8 85.7 86.3

Notes:

  • NOx ≤ 500 mg/Nm3; exhaust gas dry at 5 % O2.
  • Electrical output according to ISO 3046-1 at U = 11 kV, p.f = 1.0 for 50 Hz and a minimum methane number of MN 70 for natural gas.
  • Thermal output values are based on Exhaust gas cooled to 120°C for natural gas and 180°C for biogas.
  • The values given above are for information purposes only and not binding. The information given in the offer is decisive.

Specifications and Dimensions

Engine Type   TCG 2020 V12 (1.0) TCG 2020 V12 K1 TCG 2020 V12 K TCG 2020 V12 TCG 2020 V16 K TCG 2020 V16 TCG 2020 V20 TCG 2020 V20 (HE)
Length mm 4660 4660 4790 4790 5430 5430 6200 6200
Width mm 1810 1810 1810 1810 1810 1810 1710 1710
Height mm 2210 2210 2210 2210 2210 2210 2190 2190
Dry weight genset Kg 11200 11200 11700 11700 13300 13300 17900 17900
Bore/stroke mm 170/195 170/195 170/195 170/195 170/195 170/195 170/195 170/195
Displacement dm3 53.1 53.1 53.1 53.1 70.8 70.8 88.5 88.5
Speed min-1 1500 1500 1500 1500 1500 1500 1500 1500
Mean piston speed m/s 9.8 9.8 9.8 9.8 9.8 9.8 9.8 9.8

Notes:

  • The values given above are for information purposes only and not binding. The information given in the offer is decisive.

For More Information >>Click Here